Taker B30 Ballistic Shield Light

Tuotekoodi: 480-331

Valitse vaihtoehto

Valitse määrä

Hinta yhteensä

349.00(sis. ALV)

Jaa Facebookissa

FoxFury Taker B30 Ballistic Shield Light


The FoxFury Taker B30 is a compact, retrofittable 600 lumen LED light for ballistic shields. This durable ballistic shield light can be programmed for either On or Off or Tactical modes (Momentary, Turbo-Strobe, Continuous On) situations to provide a non-lethal tactical advantage in the field. The lightweight B30 ballistic shield light uses a single pressure switch, CREE LED technology and is powered by CR123 batteries. It mounts via incredibly sturdy industrial 3M reclosable fastener to all entry shields, tactical, first responder and ballistic shields (level IIA, III, IIIA and IV). For Use In: SWAT, special operations (Military and Police), hostage rescue (search & recover), warrant entry, active shooter and mobile security



  • Max Output: 600 lumens
  • Battery Life: 5 hours
  • Battery Type: 6x CR123 batteris



Ballistic shields are expensive. The last thing you want to do is drill a hole in them as it may compromise the shield's ballistic properties. This light and battery pack can quickly and effectively be mounted to shields via the included industrial VELCRO to prevent any unnecessary modification.


Our shield lights are fully waterproof, fire-resistant, impact-resistant and can be used in all-weather situations.



A wider beam angle provides panoramic lighting and immediate situation assessment so that you can see and respond faster. This is helpful in close quarters (hallways and doorways).


This light comes with a kill switch feature. It allows the operator to lock out the light from unintentional activation



This model comes equipped with a single pressure switch, which is used to activate the light and change modes.



  • Applications: LE & Military
  • Battery Life Low: 7 hours
  • Battery Life Medium: 5+ hours
  • Beam Angle 1: 30 degree
  • CE Cert: CE
  • Color Temperature: 5700 K
  • Depth: 23 mm
  • FYL Battery High: 5 hours
  • FYL Max Lumens: 600 lumens
  • Feature 1: Single switch operation; Kill switch; Mounting system: 3M dual-lock industrial reclosable fastner; Lens can be replaced; Turbo-strobe mode; Two programmed mode settings
  • Fire Resistant: Yes - meets NFPA 1971-2007 Fire Resistant Requirements: 500F / 260C for 30 minutes
  • Height: 50 mm
  • Impact Resistant: 3 m
  • Led Color: White
  • LOQ 1: Countinous On
  • LOQ 2: Temporary on
  • LOQ 3: Turbo-strobe
  • Materials 1: Aluminium 6061-t6 hard anodized housing
  • Materials 2: Polycarbonate lens
  • Materials 3: Wiring: Heavy duty steel braided cable, nylon cover
  • Max Beam Distanced: 92 m
  • Modes: On/Off or Tactical mode (Momentary, Turbo-Strobe, Continuous on)
  • Operating Temperature: -10° C to 149° C *w/ Silicone Strap Only
  • Power Source 1: 6 x CR123 batteries
  • Power Source 2: 3 x RCR123 batteries
  • Power Source info 1: Batteries NOT included
  • Power Source Info 2: Can be used by only 3 CR123 batteries or 3 RCR123 batteries. (Battery life is reduced by 50%)
  • Runtime: 5 hours
  • Shield Fit: Riot, ballistic (body bunker, entry shields and tactical shields
  • Warranty: 24 months
  • Waterproof: 10 m
  • Weight: 343 g
  • What`s included: 3M reclosable fastner, pressure switch
  • Width: 100 mm

FinnProtec Oy
Kilonkallio 3B, FI-02610 Espoo
Tel: +358 9 554 334
Sijainti kartalla

Copyright © 2021 Finnprotec Oy Kaikki oikeudet pidätetään.