Oakley

SI Ballistic M-Frame 3.0 Lens

Tuotekoodi: 53-052

Valitse vaihtoehto

Valitse määrä

Hinta yhteensä

53.00(sis. ALV)

Jaa Facebookissa

Oakley SI Ballistic M-Frame 3.0 Lens

 

Oakley SI Ballistic M-Frame 3.0 replacement lenses

  • Lenses are made of Plutonite®, Oakley’s high purity optical-grade polycarbonate
  • Oakley High Definition Optics (HDO®) with Polaric Ellipsoid™ geometry
  • All lenses feature an advanced anti-fog coating

 

Features

  • Lenses are made of Plutonite®, Oakley’s high purity optical-grade polycarbonate
  • Oakley High Definition Optics (HDO®) with Polaric Ellipsoid™ geometry
  • All lenses feature an advanced anti-fog coating
  • UV protection of Plutonite lens material that filters out all UVA / UVB & harmful blue light up to 400nm wavelength
  • Meets or exceeds ANSI Z87.1 (high-mass and high-velocity) and MIL-PRF-32432A

 

MIL-SPECT FOR THE ELITE

BALLISTIC IMPACT

In order for SI Ballistic eyewear to meet the MIL PRF 32432A ballistic impact requirement, Oakley eyewear is hit with a 0.15 caliber, 5.85 grain, T37 shaped projectile at approximately 700-725 feet per second. The eyewear must remain intact throughout the test, without experiencing any dislodged components or fracture to the lens.

 

ANSI Z87.1 (2015)

HIGH-MASS IMPACT

Part of an industrial standard called ANSI Z87.1 (2015), the High-Mass Impact test requires that the lens be hit by a 500-gram metal spike (over a pound of weight) dropped from a height of 51.2 inches (over four feet). To pass the test, no frame parts or lens fragments that could damage the eye may be ejected during impact.

 

HIGH-VELOCITY IMPACT

Oakley premium eyewear surpasses the ANSI Z87.1 (2015) test for high-velocity impact protection. For this test, a pneumatic cannon accelerates a quarter-inch steel shot to 102 miles per hour. The lens is targeted straight on from three different heights and at seven different angles. To pass the high-velocity test, no contact between the lens and eye is permitted during impact. In addition, no frame parts or lens fragments that could damage the eye may be ejected during impact.

 

Lens options

  • Grey Lens with neutral contrast features 17% visible light transmittance, suitable for use in bright light conditions.
  • Prizm TR22 lens with increased contrast features 19% visible light transmittance, suitable for use in medium light conditions.
  • VR28 lens with increased contrast features 28% visible light transmittance, suitable for use in bright light conditions.
  • Prizm TR45 lens with increased contrast features 44% visible light transmittance, suitable for use in low light conditions.
  • Persimmon lens with increased contrast features 61% visible light transmittance, suitable for use in low light conditions
  • Clear lens with neutral contrast features 93% visible light transmittance, suitable for use in low light conditions.

FinnProtec Oy
Kilonkallio 3B, FI-02610 Espoo
Tel: +358 9 554 334
Sijainti kartalla

Copyright © 2022 Finnprotec Oy Kaikki oikeudet pidätetään.