Oakley

SI Ballistic M-Frame Alpha Operator Kit

Tuotekoodi: OO9296-02

Valitse vaihtoehto

Valitse määrä

Hinta yhteensä

417.00(sis. ALV)

Jaa Facebookissa

Oakley SI Ballistic M-Frame Alpha Operator Kit

 
 
ALPHA is a three-part system composed of a frame, gasket and goggle. A single lens works across all platforms.The complete package, the ALPHA Operator Kit contains the entire Oakley ALPHA ‘eco-system.’ A design founded on modularity and scalability,  the kit includes all of the following componentry:

 

  • SI Ballistic M Frame® ALPHA™ Frame
  • Meets or exceeds ANSI Z87.1 (high-mass and high-velocity and MIL-PRF-32432A
  • SI Ballistic Halo™ Goggle
  • SI HELO – ALPHA™ a lightweight and soft rubberized gasket to block wind and dust
  • Goggle Velcro Split Strap
  • Clear, Grey, Prizm TR22, and Prizm TR45 lens.
  • Anti-fog recharge kit
  • Small Microfiber Bag
  • Large Microfiber Bag
  • M Frame Retention Lanyard

 

MIL-SPECT FOR THE ELITE

BALLISTIC IMPACT

In order for SI Ballistic eyewear to meet the MIL PRF 32432A ballistic impact requirement, Oakley eyewear is hit with a 0.15 caliber, 5.85 grain, T37 shaped projectile at approximately 700-725 feet per second. The eyewear must remain intact throughout the test, without experiencing any dislodged components or fracture to the lens.

 

ANSI Z87.1 (2015)

HIGH-MASS IMPACT

Part of an industrial standard called ANSI Z87.1 (2015), the High-Mass Impact test requires that the lens be hit by a 500-gram metal spike (over a pound of weight) dropped from a height of 51.2 inches (over four feet). To pass the test, no frame parts or lens fragments that could damage the eye may be ejected during impact.

 

HIGH-VELOCITY IMPACT

Oakley premium eyewear surpasses the ANSI Z87.1 (2015) test for high-velocity impact protection. For this test, a pneumatic cannon accelerates a quarter-inch steel shot to 102 miles per hour. The lens is targeted straight on from three different heights and at seven different angles. To pass the high-velocity test, no contact between the lens and eye is permitted during impact. In addition, no frame parts or lens fragments that could damage the eye may be ejected during impact.

FinnProtec Oy
Kilonkallio 3B, FI-02610 Espoo
Tel: +358 9 554 334
Sijainti kartalla

Copyright © 2022 Finnprotec Oy Kaikki oikeudet pidätetään.