Ops-Core

FAST SF Super High Cut Helmet

Tuotekoodi: A14570-02N4204

Hinta yhteensä

Pyydä tarjous!

Jaa Facebookissa

Ops-Core FAST SF Super High Cut Helmet

 

 

 

FEATURES & SPECIFICATIONS

 

  • Super high cut, ballistic shell made of a hybrid composite of the most advanced Carbon, Unidirectional Polyethylene and woven Aramid.
  • High performance evolution of the Ops-Core FAST MT Super High Cut Helmet, with an 8% weight reduction, while maintaining compatibility with FAST head borne accessories.
  • Super high cut shell geometry extends critical coverage over the rear occipital bone without load carrier interference, and optimizes weight distribution for increased stability, integration, balance, and improved comfort.
  • Ear cut geometry is 16 mm higher than the FAST XP High Cut shell shape, allowing for clearance of larger communication headsets.
  • Super High Cut Skeleton Rails offer lower profile with a 30% weight reduction from FAST MT Super High Cut Rails.
  • Features a lightweight Modular Bungee Shroud (MBS) which reduces snag hazards and interference. Carabiner clips improve NVG retention and stability.
  • Molded liner features proprietary recessed groove, accommodating over-the-head communications headsets with no interference or user discomfort, and ability to doff and don helmet without removing the headset.
  • Vented Lux Liner features expanded polypropylene (EPP) liner, offering enhanced impact protection, and molded-in vent holes are integrated with the shell to provide increased airflow and reduce heat stress.
  • Helmets come standard with right eye dominant retention (buckle on left). A left eye dominant retention (buckle on right) are available for the Ops-Core Vented Lux Liner – Low Profile Occ-Dial Kit, Ops-Core Vented Lux Liner – Worm-Dial Kit and Ops-Core Vented Lux Liner – H-nape Kit, which can be purchased separately.
  • Available with three suspension/retention options.

 

 

SUSPENSION & RETENTION OPTIONS

 

The Ops-Core Vented Lux Liner is a suspension system that combines a one-piece full coverage impact layer with modular breathable comfort pads that can be customized and repositioned for comfort without affecting impact performance.

 

AVAILABLE OPTIONS

  • Vented Lux Liner with Worm-Dial Fitband
  • Vented Lux Liner with H-Nape Chinstrap
  • Vented Lux Liner with Low Profile Occ-Dial Fitband

 

SIZE

 

  • M 53-56 cm
  • L 56-59 cm
  • XL 59-62 cm
  • XXL 62-64,5 cm

 

COLORS:

  • Tan 499
  • Foliage Green
  • Black
  • MultiCam
  • Desert MARPAT
  • Urban Gray

 

Performance Specification*

  • Modified and Abbreviated Family of Tactical Headborne Systems, dated June 30th 2017
  • Ops-Core Performance Specification FAST SF PS-1228

 

Ballistic Testing*

Not all suspension/retention options are tested to full stated standards.

 

Blunt Impact Protection

  • 150 g’s maximum at 10 ft/s. Maximum allowable dent 0.023”

 

Compression Testing

  • Top-Bottom = .020” (0.51 mm) Max @ 400 lbs. (181.44 kg), Side-Side = .125” (3.18 mm) Max @ 300 lbs. (136.08 kg) lbs.

 

Environmental Resistance

  • Temperature -Storage and Operating at Ambient, Cold -60° F (-51° C), and Hot +160° F (71° C), Temperature Shock, Flame Resistance, Altitude, Seawater, Field Agent Resistance, Weatherometer

FinnProtec Oy
Kilonkallio 3B, FI-02610 Espoo
Tel: +358 9 554 334
Sijainti kartalla

Copyright © 2020 Finnprotec Oy Kaikki oikeudet pidätetään.