The detachable WINDSTOPPER® Lining provides breathable thermal insulation for all P-40 and Striker Pants.
UPGRADE YOU PANTS TO THERMAL GEAR
The UF PRO WINDSTOPPER Liner is the perfect add-on for your Striker or P-40 pants in cold-weather environments. Easily connects to the pants via a zipper found along the outer edge. You’ll find that the additional thermal insulation they provide plus 100% protection against wind-chill are must-haves while operating in sub-zero temperatures.
The size of the lining depends on the size of your UF PRO pants. Your pants size is defined by width/length. If your pants size is for example 33/32, then this means that the width of your pants is 33 and the length 32.
STEP TWO: DEFINE YOUR LINING SIZE
The size of the lining is defined by Width and Length.
*A length of 30 or 32 correlates with a lining length of S. *A length of 33 to 36 correlates with a lining length of L.
So, if your pants size is 33/32, then your lining size should be 33/S. If your pants size is 33/34, then your lining size should be 33/L.
Use the chart below to determine your lining size.